This code specifies the construction, examination and inspection requirements of toxic and combustible medium steel piping engineering in petrochemical industry.
This code is applicable to the construction and acceptance of toxic and combustible medium steel piping engineering in petrochemical industry, with nominal pressure less than or equal to PN 420 (CL 2500) and design temperature between -196℃~850℃; it is not applicable to the construction and acceptance of long-distance piping and gas piping engineering in town.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this code. Subsequent amendments (excluding amending errors in the text) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document is applicable to this code.
GB/T 229 Metallic Materials - Charpy Pendulum Impact Test Method
GB 1954 Methods of Measurement for Ferrite Content in Austenitic Stainless Steel Weld Metals
GB/T 4334 Corrosion of Metals and Alloys - Test Methods for Intergranular Corrosion of Stainless Steels
GB 5044 Classification of Health Hazard Levels from Occupational Exposure to Toxic Substances
GB 5777 Seamless Steel Pipe and Tubing - Methods for Ultrasonic Testing
GB 16912 Safety Technical Regulation for Oxygen and Relative Gases Produced with Cryogenic Method
GB 50016 Code for Design of Building Fire Protection
GB 50160 Fire Prevention Code of Petrochemical Enterprise Design
GB 50484 Technical Code of Construction Safety of in Petrochemical Engineering
GB 50517 Code for Construction Quality Acceptance of Metallic Piping in Petrochemical Engineering
JB/T 4730 Nondestructive Testing of Pressure Equipment
SH 3097 Code for the Design of Static Electricity Grounding for Petrochemical Industry
SH/T 3503 Regulation of Technical Document for Construction Completion of Petrochemical Industry Project
SH 3518 Code for Valves Inspection and Management
SH/T 3521 Technical Code of Construction of Instrumentation Engineering for Petrochemical Industry
SH/T 3525 Welding Specification of Low Temperature Steel for Petrochemical Engineering
SH/T 3526 Welding Specification of Different Steels for Petrochemical Engineering
SH/T 3543 Technical Document Specification of Construction Process for Petrochemical Engineering Project
SH/T 3546 Code for Construction and Acceptance of Jacket Pipes in Petrochemical Engineering
SH/T 3547 Code for Construction and Acceptance of Chemical Cleaning for Petrochemical Equipment and Piping
TSG D2001 Pressure Piping Components Manufacture Appraisal Regulation
TSG ZF001 Safety Technical Supervision Regulations for Safety Valves
TSG Z6002 Examination Rules for Welding Operators of Special Equipment
GZJG[2003]No.248 Assessment, Supervision and Administration Rules for Non-destructive Testing Personnel of Special Equipment
3 Terms and Definitions
The following terms and definitions are applicable to this code.
3.1
Pressure piping
Piping in petrochemical industry engineering, for transmitting gas, liquefied gas, steam medium with design pressure greater than or equal to 0.1MPa (gauge pressure), or combustible, toxic or corrosive liquid medium with design temperature equal to or greater than the normal boiling point and nominal diameter greater than 25mm.
3.2
Piping components
Closed piping system components for connecting or assembling bearing pressure.
3.3
Pipe-supporting elements
Components for transmitting the piping load to pipe support structure.
3.4
Inspection certificate
The inspection document indicated with inspection results, where the deliveries are inspected and tested by an independent authorized department (other than the production department of the manufacturer) or individual according to the provisions of this code and the contract.
