This part specifies the test methods for User Equipment (HSUPA) of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network in terms of the following aspects: system access, location area road area update, cell reselection, paging, cell update/URA update, handover, circuit domain packet domain service, HSDPA, supplementary service, value-added service, concurrent service and call performance.
This part is applicable to the User Equipment (HSUPA) of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network.
2 Normative References
The following normative documents contain provisions which, through reference in this part, constitute provisions of this part. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
YD/T 1777.2-2008 Test Method for User Equipment (Release 5) of 2GHz TD-SCDMA Digital Cellular Mobile Communication Network HSDPA - Part 2: Network Compatibility Test
3 Abbreviations
For the purpose of this part, the following abbreviations apply.
AMR Adaptive Multi Rate
AWGN Additive White Gaussian Noise
BCCH Broadcast Control Channel
BCH Broadcast Channel
CCCH Common Control Channel
CCPCH Common Control Physical Channel
CN Core Network
DL DownLink
DPCH Dedicated Physical Channel
GSM Global System for Mobile Communications
GPRS General Packet Radio Service
HARQ Hybrid Automatic Repeat Request
HSDPA High Speed Downlink Packet Access
HSUPA High Speed uplink Packet Access
HS-DSCH High Speed Downlink Shared Channel
HS-PDSCH High Speed Physical Downlink Shared Channel
HS-SCCH High Speed Shared Control Channel
IMSI International Mobile Subscriber Identity
MSC Mobile Switching Centre
NAS Non Access Straum
P-CCPCH Primary Common Control Physical Channel
PDP Packet Data Protocol
PLMN Public Land Mobile Network
PSTN Public Switched Telephone Network
RLC Radio Link Control
RRC Root-Raised Cosine
RSCP Received Signal Code Power
S-CCPCH Secondary Common Control Physical Channel
SCH Synchronization Channel Consisting of Primary and Secondary Synchronization Channels
TDD Time Division Duplexing
TFC Transport Format Combination
TMSI Temporary Mobile Subscriber Identity
UE User Equipment
UTRAN Universal Telecommunication Radio Access Network
4 General
4.1 Test environment
In this part, the test environment can be divided into two types: commercial network test environment and laboratory test environment. Wherever possible, test items shall be tested in a commercial network environment. Considering the operational security of the commercial network, some test items, such as items requiring network parameter adjustment and special configuration, may be tested in the test network environment. Refer to Annex A for the details.
Referenced test environment is shown in Figure 1.
YD/T 1841.2-2009 The following standards are cited：
