This standard specifies measurement method for radiated RF power and receiver performance of 2GHz WCDMA mobile stations, including frequency range and limits.
It is applicable to portable 2GHz WCDMA mobile stations, vehicle-mounted ones as well as those powered by AC power and used at fixed position and the 2GHz WCDMA data equipment that is connected to portable computer via USB interface, Express interface, PCMCIA interface and the like.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
YD/T1484 Measurement Method for Radiated RF Power and Receiver Performance of Mobile Stations
3GPP TS25.101 User Equipment Radio Transmission and Reception
3GPP TS34.109 Terminal Logical Test Interface - Special Conformance Testing Functions
3GPP TS34.121-1 User Equipment (UE) Conformance Specification - Radio Transmission and Reception (FDD) - Part 1: Conformance Specification
3 Terms, Definitions and Abbreviations
For the purposes of this standard, the following terms, definitions and abbreviations apply.
3.1 Terms and Definitions
For the purposes of this standard, terms and definitions given in YD/T 1484 apply.
3.2 Abbreviations
For the purposes of this standard, abbreviations given in YD/T 1484 apply.
4 Test Conditions
Except for the following special instructions, test conditions given in YD/T 1484 apply to this standard.
