This standard specifies the classification, grading and code, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of burglary-resistant electronic locks.
This standard is applicable to the design, manufacture, inspection and acceptance of burglary-resistant electronic locks.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2423.1 Environmental Testing — Part 2: Test Methods — Tests A: Cold
GB/T 2423.2 Environmental Testing — Part 2: Test Methods — Tests B: Dry Heat
GB/T 2423.3 Environmental Testing — Part 2: Test Methods — Test Cab: Damp Heat Steady State
GB/T 2423.5 Environmental Testing — Part 2: Test Methods — Test Ea and Guidance: Shock
GB/T 2423.8 Environmental Testings for Electric and Electronic Products — Part 2: Test Methods — Test Ed: Free fall
GB/T 2423.10 Environmental Testings for Electric and Electronic Products — Part 2: Test Methods — Test Fc: Vibration (Sinusoidal)
GB/T 2423.17 Environmental Testings for Electric and Electronic Products — Part 2: Test Methods — Test Ka: Salt Mist
GB/T 2828.1 Sampling Procedures for Inspection by Attributes — Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 4208-2017 Degrees of Protection Provided by Enclosure (IP Code)
GB 16796-2009 Safety Requirements and Test Methods for Security Alarm Equipment
GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) — Testing and Measurement Techniques — Electrostatic Discharge Immunity Test
GB/T 17626.3-2016 Electromagnetic Compatibility — Testing and Measurement Techniques — Radiated Radio-frequency Electromagnetic Field Immunity Test
GB/T 30148-2013 Security Alarm Equipments — EMC Immunity Requirements and Test Methods
GA/T 73-2015 Burglary-resistant Mechanical Locks
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1.1
burglary-resistant electronic lock
locksets, of the required security level, that electronically identify and process relevant information, control the actuators to locking and unlocking
3.1.2
single burglary-resistant electronic lock
burglary-resistant electronic locks that do not have the function of online unlocking information interchange with remote terminals
3.1.3
networking burglary-resistant electronic lock
burglary-resistant electronic locks that have the function of online unlocking information interchange with remote terminals
3.1.4
digital key
carrier containing digitally encoded information used to control the locking and unlocking of burglary-resistant electronic locks.
3.1.5
personal identification number key
personal identification number used to control the locking and unlocking of burglary-resistant electronic locks
3.1.6
biometric key
human body biologic characteristic (such as fingerprint, iris, finger vein, face, etc.) used to control the locking and unlocking of burglary-resistant electronic locks
