This Standard specifies technical specifications, test methods, test rules, as well as marking, packaging, transportation and storage of desktop readers of resident ID card.
This Standard is applicable to desktop readers of resident ID card (hereinafter referred to as reader).
2 Normative References
The following referenced documents are indispensable for the application of this Document. For dated references, only the dated versions are applicable to this Standard. For undated references, the latest edition of the normative document (including all the amendments) is applicable to this Standard.
GB/T 191 Packaging-Pictorial Marking for Handling of Goods
GB/T 2421.1-2008 Environmental Testing - General and Guidance
GB/T 2423 1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold
GB/T 2423 2-2008 Environmental Testing - Part 2: Test Methods - Tests B: Dry Heat
GB/T 2423.3-2006 Environmental Testing For Electric And Electronic Products - Part 2: Testing Method Test Cab: Damp Heat Steady State
GB/T 2423.5-1995 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Ea and Guidance: Shock
GB/T 2423 6-1995 Environmental Testing for Electric and Electronic Products - Part 2: Test methods - Test Eb and Guidance: Bump
GB/T 2423.8-1995 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Ed: Free Fall
GB/T 2423.10-2008 Environmental Testing for Electric and Electronic Products - Part 2: Tests Methods - Test Fc: Vibration (Sinusoidal)
GB 4943 1-2011 Information Technology Equipment—Safety - Part 1: General Requirements
GB/T 5080.7-1986 Equipment Reliability Testing - Compliance Test Plans for Failure Rate and Mean Time between Failures Assuming Constant Failure Rate
GB/T 5271.14-2008 Information Technology - Vocabulary Part 14: Reliability，Maintainability and Availability
GB 9254-2008 Information Technology Equipment-Radio Disturbance Characteristics-Limits and Methods of Measurement
GB/T 14916-2006 Identification Card - Physical Characteristics
GB/T 17626. 2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques-Electrostatic Discharge Immunity Test
GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement Techniques-Radiated, Radio-Frequency, Electromagnetic Field Immunity Test
GB/T 17626.4-2008 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test
GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test
GB/T 17626.6-2008 Electromagnetic Compatibility - Testing nd Measurement Techniques - Immunity to Conducted Disturbances Induced by Radio - Frequency Fields
GB/T 17626.8-2006 Electromagetic Compatibility - Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test
GB/T 17626.11-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
GA 449 Terms of Resident Identity Card
ISO/IEC 14443-2 Identification Cards - Contactless Integrated Circuit(s) Cards- Proximity Cards- Part 2 - Radio Frequency Power and Signal Interface
ISO/IEC 14443-3 Identification Cards -Contactless integrated circuit(s) Cards - Proximity cards - Part 3 Initialization and Anti-collision
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
For the purposes of this Standard, the following terms and definitions defined in GA 449 apply.
3.1.1
Desktop readers of the resident ID card
(USD)