This standard is based on the international standard ISO/DIS 105/F10-1988 "Textiles-Tests for colour fastness-Specification for standard adjacent fabric:Multifibre"
1 Subject Content and Application Scope
This standard specifies the specifications of the multifibre standard adjacent fabric for staining evaluation in the tests for colour fastness of textile as well as the method for testing staining performance.
This standard is applicable to the manufacture and acceptance of the standard adjacent fabric of multifibre for staining evaluation in the tests for colour fastness of textiles.
Note:
1) Supply organization of the standard multifibre adjacent fabrics: Shanghai Textile Institute of Standards of Metrology.
2 Normative References
GB 3921" Textiles--Tests for colour fastness--Colour fastness to washing"
GB6151"Textiles-Tests for colour fastness-General principle of testing"
GB 7564Textiles--Tests for colour fastness--Specification for wool adjacent fabric
GB 7565"Textiles—Sts for Colour Fastness—Ecification for STANDARD Adjacent Fabric-Cotton and Viscose"
GB 7566"Textiles--Tests for Colour Fastness--Specification for Polyester Adjacent Fabric"
GB 7567"Textiles--Tests for Colour Fastness--Specification for Acrylic Adjacent Fabric"
GB 7568"Textiles--Tests for Colour Fastness--Specification for Silk Adjacent Fabric"
GB 11403"Textiles--Tests for Colour Fastness--Specification for Polyester Adjacent Fabric"
3 Principles
3.1 Each weaving strip of the standard multifibre adjacent fabric shall be provided with similar staining performance with the standard single fibre adjacent fabric in corresponding type and the see Annex A (Additional) for the testing method of staining performance.
3.2 Two types of standard multifibre adjacent fabric are shown as the following table and shall be adopted as demands.
