This standard specifies the terms and definitions, classification and designation, requirements, test methods, inspection rules as well as marking, packaging, storage and transport of polyvinyl chloride plastic waterproofing sheets.
This standard is applicable to polyvinyl-chloride-based plastic waterproofing sheets used for waterproofing in construction works.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, only the dated edition applies. For undated references, the latest edition (including all amendments) applies.
GB/T 328.5-2007 Test Methods for Building Sheets for Waterproofing - Part 5: Plastic and Rubber Sheets for Waterproofing - Thickness and Mass Per Unit Area
GB/T 328.7 Test Methods for Building Sheets for Waterproofing - Part 7: Plastic and Rubber Sheets for Waterproofing - Length, Width, Straightness and Flatness
GB/T 328.9-2007 Test Methods for Building Sheets for Waterproofing - Part 9: Plastic and Rubber Sheets for Waterproofing - Tensile Properties
GB/T 328.10-2007 Test Methods for Building Sheets for Waterproofing - Part 10: Bitumen Plastic and Rubber Sheets for Waterproofing - Watertightness
GB/T 328.13 Test Methods for Building Sheets for Waterproofing - Part 13: Plastic and Rubber Sheets for Waterproofing - Dimensional Stability
GB/T 328.15 Test Methods for Building Sheets for Waterproofing - Part 15: Plastic and Rubber Sheets for Waterproofing - Foldability at Low Temperature
GB/T 328.19 Test Methods for Building Sheets for Waterproofing - Part 19: Plastic and Rubber Sheets for Waterproofing - Resistance to Tearing
GB/T 328.21 Test Methods for Building Sheets for Waterproofing - Part 21: Plastic and Rubber Sheets for Waterproofing - Peeling Off Seam Strength
GB/T 328.25-2007 Test Methods for Building Sheets for Waterproofing - Part 25: Bitumen Plastic and Rubber Sheets for Waterproofing - Resistance to Static Loading
GB/T 528 Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress - Strain Properties
GB/T 529 Rubber Vulcanized or Thermoplastic - Determination of Tear Strength (Trouser, Angle and Crescent Test Pieces)
GB/T 10801.2 Rigid Extruded Polystyrene Foam Board for Thermal Insulation (XPS)
GB/T 18244 Test Methods for Resistance to Weathering of Building Waterproofing Materials
GB/T 18378 Terminology for Waterproof Bitumen and Waterproof Sheet
GB/T 20624.2 Paints and Varnishes - Rapid-deformation (Impact Resistance) Tests - Part 2: Falling-weight Test (Small-Area Indenter)
GB 50009 Load Code for the Design of Building Structures
3 Terms and Definitions
For the purpose of this standard, the terms and definitions given in GB/T 18378 and the following terms and definitions apply.
