This part of GB 15208 specifies the general technical requirements, test methods, inspection rules, packaging, marking, storage, transportation and accompanied technical documents of transmission baggage security inspection system.
This part is applicable to the design, manufacturing, assembling, acceptance and service of various transmission baggage security inspection systems.
Note: for the entrance of any inspection channel of this system, either the height or width of the entrance section is less than 1.1m.
This part is not applicable to X-ray security inspection system like computed tomography (CT), electron accelerator or X-ray generating device with energy greater than 500keV.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 15208.1-2018 Micro-dose X-ray security inspection system - Part 1: General technical requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 15208.1-2018 and the followings apply.
3.1
wire display
capability of the system in differentiating single solid-core copper wires
Note: generally, it is expressed by the nominal diameter (mm) of wire.
3.2
useful penetration resolution
GB 15208.2-2018 The following standards are cited：
