This standard specifies bonding property, harmful substance limit and test methods of adhesives for footwear and case and bag.
This standard is applicable to adhesives for footwear and case and bag.
This standard does not concern all the user-related safety issues. It is the responsibility of the users to establish the relevant safety and hygiene clauses and the application scope stipulated prior to use to comply with the relevant national regulations (e.g. concentration of harmful substances in the air of workplace).
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments(excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 532 Rubber Vulcanized or Thermoplastic - Determination of Adhesion to Textile Fabric (idt ISO 36)
GB/T 7124 The Method for Determination of Strength Properties of Adhesive in Shear by Tension Loading (Metal to Metal) (eqv ISO 4587)
GB 18583 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Adhesives
HG/T 2815 Test Methods for Adhesive Heat Resistance Used for Shoes - Creep Method
HG/T 3075 The Specification for Package, Mark, Transportation and Storage of Adhesive Products
3 Technical Requirements
3.1 Bonding property of footwear adhesives for bonding shoe upper with sole and bonding overlapping sole shall be in accordance with those specified in Table 1.