This standard specifies terms and definitions, requirements and test methods, inspection rules, plates, and marking, packaging, transportation and storage of detergent additive for vehicular gasoline.
This standard is applicable to production, sale and inspection of detergent additive for vehicular gasoline.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the document referred to applies.
GB/T 261 Petroleum Products - Determination of Flash Point - Closed Cup Method (GB/T 261-1983(1991), eqv ISO 2719:1988)
GB/T 380 Determination of Sulfur Content in Petroleum Products (Lamp Method)
GB/T 503 Test Method for Knock Characteristics of Motor and Aviation Fuels by the Motor Method
GB/T 3535 Petroleum Oils - Determination of Pour Point (GB/T 3535-1983, eqv ISO 3016:1974)
GB/T 4756 Petroleum Liquids - Manual Sampling (GB/T 4765-1998, eqv ISO 3170:1988)
GB/T 5487 Test Method for Knock Characteristics of Motor Fuels by the Research Method
GB/T 6536 Petroleum Products - Determination of Distillation
GB/T 8018 Gasoline - Determination of Oxidation Stability - Induction Period Method
GB/T 11132 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
GB/T 13306 Plates
GB 17930 Unleaded Petrol (Gasoline) for Motor Vehicles
GB/T 19230.1 Test Method for Evaluating Gasoline Detergent in Use - Part 1: Test Method for Rust-preventing Characteristics of Gasoline Detergent
GB/T 19230.2 Test Method for Evaluating Gasoline Detergent in Use - Part 2: Test Method for Demulsibility of Gasoline Detergent
GB/T 19230.3 Test Method for Evaluating Gasoline Detergent in Use - Part 3: Test Method for Evaluating Gasoline Detergent Produced Effect for Electronic Port Fuel Injector (PFI) Fouling
GB/T 19230.4 Test Method for Evaluating Gasoline Detergent in Use - Part 4: Test Method for Influence of Induction System Deposit (ISD)Tendencies of Gasoline Detergent
GB/T 19230.5 Test Method for Evaluating Gasoline Detergent in Use - Part 5: Engine Dynamometer Test Method for Influence of Intake Valve and Combustion Chamber Deposit Tendencies of Gasoline Detergent (Ford 2.3L Method)
GB/T 19230.6 Test Method for Evaluating Gasoline Detergent in Use - Part 6: Engine Dynamometer Test Method for Influence of Intake Valve and Combustion Chamber Deposit Tendencies of Gasoline Detergent (M111 Method)
SH 0164 Petroleum Products - Rules for Packaging, Storage, Transportation, Delivery and Acceptance
SH/T 0224 Determination of Nitrogen Content in Petroleum Additives by Kjeldahl Method
SH/T 0704 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-inlet Chemiluminescence
