This standard specifies the terms and definitions, requirements and test methods, inspection rules, signs, packaging, transportation, storage and safety of detergent additive for motor gasoline.
This standard is applicable to the detergent additives used in motor gasoline and ethanol gasoline.
2 Normative References
The following documents for the application of this document are essential. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB 190 Packing symbol of dangerous goods
GB/T 261 Determination of flash point - Pensky-Martens closed cup method
GB/T 511 Petroleum, petroleum products and additives—Method for determination of mechanical admixtures
GB/T 3535 Petroleum products—Determination of pour point
GB/T 4756 Method for manual sampling of petroleum liquids
GB/T 11140 Standard test method for sulfur in petroleum products by wavelength dispersive X-ray fluorescence spectrometry
GB 17930 Gasoline for motor vehicles
GB/T 19230.1 Test method for evaluating gasoline detergent in use—Part 1: Test method for rust-preventing characteristics of gasoline detergent
GB/T 19230.2 Test method for evaluating gasoline detergent in use—Part 2: Test method for demulsibility of gasoline detergent
GB/T 19230.3 Test method for evaluating gasoline detergent in use—Part 3: Test method for evaluating gasoline detergent produced effect for electronic port fuel injector(PFI) fouling
GB/T 19230.5 Test method for evaluating gasoline detergent in use—Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent (Ford 2.3L method)
GB/T 19230.6 Test method for evaluating gasoline detergent in use—Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent (M111 method)
GB 30000.7-2013 Rules for classification and labelling of chemicals—Part 7: Flammable liquids
GB/T 37322-2019 Test method for evaluating gasoline cleanliness—Simulation test of intake valve deposit (IVD) of gasoline engine
SH/T 0164 Petroleum products - Rules for packaging, handling, delivery and acceptance
SH/T 0224 Determination of nitrogen content in petroleum additives (Kjeldahl Method)
SH/T 0253 Determination of total sulfur content in light petroleum products (coulometric method)
SH/T 0689 Standard test method for determination of total sulfur in light hydrocarbons motor fuels and oils by ultraviolet fluorescence
NB/SH/T 0704 Standard test method for nitrogen in petroleum and petroleum products by boat-inlet chemiluminescence
NB/SH/T 0842 Standard test method for sulfur in gasoline and diesel fuel by monochromatic wavelength dispersive X-ray fluorescence spectrometry
NB/SH/T 0967 Packaged lubricant identification general rule
SH/T 1757 Aromatic hydrocarbons for industrial use -Determination of organic chloride - Microcoulometric method
ASTM D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
base fuel
the fuel used in the test to study the certain performance of the additive and having good discrimination, free from additives that can improve the performance.
