This standard specifies safety and sanitation requirements for painting process as well as its ventilation and air clean-up.
This standard is applicable to painting process and the design, installation and application of its ventilation and air clean-up system. As for outdoor painting processes for bridges, buildings, large-scale storage tank, boat and other large construction members, their ventilation and air clean-up may also refer to this.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document referred to applies.
GB 7691 "Safety Code for Painting—Safety Management General Rule"
GB 8978 "Integrated Wastewater Discharge Standard"
GB 12367 "Safety Code for Painting—Safety for Electrostatic Spray Painting Process"
GB 12942 "Safety Code for Painting—Technical Requirements of Safety for Working in Confined Spaces"
GB/T 14441 "Safety Code for Painting—Terminology"
GB 14443—2007 "Safety Code for Painting—Safety Rules for Paint Drying Oven"
GB 14444—2006 "Safety Code for Painting—Safety Rules for Spraying Booth"
GB 14773 "Safety Code for Painting—Safety Specification for Electrostatic Spray Guns and Associated Apparatus"
GB 15607—2008 "Safety Code for Painting—Safety for Electrostatic Powder Spraying Process"
GB 16297 "Integrated Emission Standards of Air Pollutants"
GB 17750 "Safety Code for Painting—Safety for Dipping Process"
GB 20101 "Safety Code for Painting—Safety Rules for Purification Equipment of Exhaust Organic Gas";
GB 50016—2006 "Code for Design of Building Fire Protection"
GB 50057—2000 "Design Code for Protection of Structures against Lightning"
GB 50058 "Electrical Installations Design Code for Explosive Atmospheres and Fire Hazard"
GB 50140 "Code for Design of Extinguisher Distribution in Buildings"
3 Terms and Definitions
The following terms and definitions as well as those specified in GB/T 14441 are applicable to this standard.
3.1 Painting process
The whole technical process of paint coating in painting operations; it includes paint distribution, workpiece transport, various coating, drying or curing methods as well as polishing and puttying.
3.2 Location of painting operations
It refers to special site and specific surrounding space for painting operations.