This part specifies to the immunity requirements of equipment, under operational conditions, to magnetic disturbances at power frequency related to:
— residential and commercial locations;
— industrial installations and power plants;
— medium voltage and high voltage sub-stations.
The applicability of this part to equipment installed in different locations is determined by the presence of the phenomenon, as specified in Chapter 3.
This part does not consider disturbances due to capacitive or inductive coupling in cables or other parts of the field installation.
Other IEC standards dealing with conducted disturbances cover these aspects.
The object of this part is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment for household, commercial and industrial applications when subjected to magnetic fields at power frequency (continuous and short duration field).
This part defines:
— recommended test levels;
— test equipment;
— test set-up;
— test procedure.
Other kinds of magnetic fields would be object of standardization:
— fields at other power frequencies (16 2/3 to 20 or 30 to 400 Hz);
— fields of harmonic currents (100 Hz to 2 000 Hz);
— fields of higher frequencies (up to 150 kHz, e.g. for mains signaling systems);
— D.C. fields.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of GB/T 17626. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
IEC 60068-1:1988 Environmental Testing — Part 1: General and Guidance
3 General
GB/T 17626.8-2006 The following standards are cited：
GB/T 17626.8-2006 Cited by the following standards：
