This part of GB/T 20234 specifies the general requirements, function definitions, type structures, parameters and dimensions of AC charging coupler for conductive charging of electric vehicles
This part is applicable to AC charging coupler for conductive charging of electric vehicles, of whichthe rated voltage shall not exceed 440V(AC), the frequency shall be 50Hz, and the rated current shall not exceed 63A(AC).
Note: If the plugs and socket-outlets of AC charging coupler adopt the standardized plugs and socket-outlets complying with GB 2099.1 and GB 1002, then this part is not applicable to these plugs and socket-outlets.
2Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 18487.1 Electric Vehicle Conductive Charging System-Part 1: General Requirements
GB/T 20234.1 Connection Set for Conductive Charging of Electric Vehicles-Part 1: General Requirements
3Terminologies and Definitions
For the purposes of this document, the terminologies and definitions defined in GB/T 20234.1 apply.