This part of GB/T 22199 specifies the model preparation, kinds, overall structures and specifications of the valve-regulated lead-acid batteries for moped.
This part is applicable to valve-regulated lead-acid batteries (hereinafter referred to as batteries) and battery packs with capacity of 28Ah and below for electric bicycles, electric scooters, electric balance vehicles, electric wheelchairs, etc., which are mainly powered by batteries. The sulfuric acid electrolyte in a battery is non-liquid, but adsorbed to the microporous structure between electrodes or in the form of a colloid.
This part is not applicable to lead-acid batteries and battery packs for other purposes such as starting, electric road vehicles and traction.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
JB/T 2599 Drawing-up and Designation Method of Name and Model of Lead-acid Battery
3 Model Preparation
The battery product model shall meet the requirements of JB/T 2599, specifically, the product type is represented by the initials “DZ” of the Chinese phonetic letters “Diandong Zhuli”. The detailed naming diagram is shown in Figure 1.
Example:
GB/T 22199.2-2017 The following standards are cited：
GB/T 22199.2-2017 Cited by the following standards：
