This standard specifies relevant terms and definitions, product classification, requirements, test method, inspection rules, marking, packaging, transport and storage for plaited bamboo products.
This standard is applicable to the plaited bamboo products for which bamboo is taken as material or bamboo is taken as main material and fabric as auxiliary material.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 2828.1-2003 Sampling Procedures for Inspection by Attributes - Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO 2859-1: 1999, IDT)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Apply to Inspection of Process Stability)
GB/T 2912.1-1998 Textiles - Determination of Formaldehyde - Part 1: Free and Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 17592-2006 Textiles - Determination of the Banned Azo Colorants
GB 18401-2003 National General Safety Technical Code for Textile Products
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
the warp
the line parallel to the length direction of the surface of plaited bamboo products
