Analytical methods of persulfate products for industrial use
1 Scope
This standard specifies the safety instruction, general requirements, and analysis method of persulfate content, pH value, iron content, chloride content, moisture content, manganese content, heavy metal content, ammonium salt content, ignition residue content and water insoluble matter content of persulfate products for industrial use.
This standard is applicable to persulfate products for industrial use, including ammonium persulfate, potassium persulfate, sodium persulfate, etc.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 3049-2006 Chemical products for industrial use - General method for determination of iron content - 1,10-Phenanthroline spectrophotometric method (ISO 6685: 1982, IDT)
GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods (ISO 3696: 1987, MOD)
GB/T 9724 Chemical reagent - General rule for the determination of pH
HG/T 3696.1 Inorganic chemical products - Preparations of standard volumetric solutions for chemical analysis
HG/T 3696.2 Inorganic chemical products - Preparations of standard solutions for chemical analysis
HG/T 3696.3 Inorganic chemical products - Preparations of reagent solutions for chemical analysis