This standard defines the test methods to determine the forces to open/close doors and to lock/unlock the hardware using a key or handle.
It is only applicable to side-hung and sliding doors with latches in manual operation, for pedestrian use.
The measurement of forces for doors with self-closing devices engaged is excluded from this test method. It is also not applicable to doors with special hardware e.g. emergency exit devices.
Note: The operation of some windows involves latches and may be tested in accordance with this standard.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 5823C2008 Terminology for Building Windows and Doors
3 Terms and Definitions
For the purposes of this standard, the terms and definitions given in GB/T 5823C2008 and the following apply.
3.1
attachment point
a point adjacent to a single handle. With more than one handle, a point midway between the extreme handle positions
4 Principle of Test
The principle consists of measuring the minimum force or torque required to lock or unlock the hardware, (locks, handles etc.), commence opening and complete closing of the sliding or side-hung door leaf to the latched position or locking of all safety devices.