This standard specifies the terms and definitions, principles, instruments and apparatus, samples, test procedures and test data processing for the determination of volatile organic compound (VOC) content in reactive diluent containing coatings.
This standard is applicable to the determination of volatile organic compound (VOC) in reactive diluent containing coatings, but not to the determination of volatile organic compound (VOC) content in radiation curable coatings.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling
GB/T 5206-2015 Paints and varnishes - Terms and definitions
GB/T 6750 Paints and varnishes - determination of density - Pyknometer method
GB/T 6753.4-1998 Paints and varnishes - Determination of flow time by use of flow cups
GB/T 9278 Temperatures and humidities for conditioning and testing of paint specimens.
GB 18582-2008 Indoor decorating and refurbishing materials - Limit of harmful substances of interior architectural coatings
GB/T 20777 Paints and varnishes - Examination and preparation of samples for testing
GB/T 21862.2 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
GB/T 21862.3 Paints and varnishes - Determination of density - Part 3: Oscillation method
GB/T 21862.4 Paints and varnishes - Determination of density - Part 4: Pressure cup method
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
the mass of volatile organic compounds contained in coatings measured under specified conditions
[GB/T 5206-2015, Definition 2.271]
3.2
reactive diluents
also called reactive solvent, which can not only dissolve or disperse film-forming substances, but also participate in the film-forming reaction in the film-forming process of coatings to form non-volatile components to remain in the coating film
GB/T 34682-2017 The following standards are cited: