This standard specifies terms and definitions, product classification, assessment requirements, assessment methods and the like for green coating products.
It is applicable to green product assessment for coating products such as water-borne coating material, coating powder, radiation curable coating material, high solid coating material and solvent-free coating material.
It is not applicable to waterproof coating material.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2589 General Principles for Calculation of the Comprehensive Energy Consumption
GB 6566 Limits of Radionuclides in Building Materials
GB 6675.4-2014 Safety of Toys - Part 4: Migration of Certain Elements
GB/T 6750-2007 Paints and Varnishes - Determination of Density - Pyknometer Method
GB/T 9754-2007 Paints and Varnishes - Determination of Specular Gloss of Non-metallic Paint Films at 20° 60°and 85°
GB/T 13491 General Rule for Packing of Coatings
GB 15258 General Rules for Preparation of Precautionary Label for Chemicals
GB/T 16483 Safety Data Sheet for Chemical Products - Content and Order of Sections
GB/T 16716.1 Packaging and Packaging Waste - Part 1: General Rules of Disposal and Utilization
GB/T 18204.2-2014 Examination Methods for Public Places - Part 2: Chemical Pollutants
GB/T 18446-2009 Binders for Paints and Varnishes - Determination of Monomeric Diisocyanates in Isocyanate Resins
GB 18582-2008 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Interior Architectural Coatings
GB 18597 Standard for Pollution Control on Hazardous Waste Storage
GB 18599 Standard for Pollution on the Storage and Disposal Site for General Industrial Solid Wastes
GB/T 19001 Quality Management Systems - Requirements
GB/T 20623-2006 Emulsions for Architectural Coatings
GB/T 23986-2009 Paints and Varnishes - Determination of Volatile Organic Compound (VOC) Content - Gas-chromatographic Method
GB/T 23990-2009 Determination of the Contents of Benzene, Toluene, Ethylbenzene and Xylene in Coatings by Gas Chromatography
GB/T 23993-2009 Determination of Formaldehyde Content of Waterborne Coatings - Spectrophtometric Method with Acetylacetone
GB/T 23994-2009 Limit of Certain Harmful Elements of Coatings for Consumer Products Contacting with Human Body
GB/T 24001 Environmental Management Systems - Requirements and Guidance for Use
GB/T 26125-2011 Electrical and Electronic Products - Determination of Six Regulated Substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers)
GB/T 26572-2011 Requirements of Concentration Limits for Certain Restricted Substances in Electrical and Electronic Products
GB/T 28001 Occupational Health and Safety Management Systems - Requirements
GB/T 30512-2014 Requirements for Prohibited Substances on Automobiles
GB/T 30647-2014 Determination of Harmful Elements Total Content of Coatings
GB/T 34675-2017 Determination of Volatile Organic Compound (VOC) Content in Radiation Curable Coatings
GB/T 34682-2017 Determination of Volatile Organic Compound (VOC) Content in Reactive Diluent Containing Coatings
GB/T 34683-2017 Determination of Formaldehyde Content in Water-borne Coatings - High Performance Liquid Chromatographic Method
GBZ 2.1 Occupational Exposure Limits for Hazardous Agents in the Workplace - Part1: Chemical Hazardous Agents
GBZ 2.2 Occupational Exposure Limits for Hazardous Agents in the Workplace - Part2: Physical Agents
AQ/T 9006 Basic Norms for Work Safety Standardization of Enterprises
JG/T 481-2015 Water-based Interior Wall Coating with Low-emission Volatile Organic Compounds (VOC)
Regulations on the Administration of Construction Project Environmental Protection (Decree No. 682 of the State Council [2017])
Regulations on the Safety Administration of Dangerous Chemicals (Decree No. 591 of the State Council [2011])
List of Ozone Depleting Substances Controlled in China (Announcement No. 72 [2010] of the Ministry of Environmental Protection)
Guideline on Control of Hazardous Substances for Inland Ship (Issued by China Classification Society in 2012)
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
green product
high-quality product that is harmless or less harmful for ecological environment and human health, less resource- and energy-consuming and meets environmental protection requirements in the total life cycle
[GB/T 33761-2017, definition 3.1]
3.2
coating material
a kind of liquid, paste or powder product, which can form a coating with protection, decoration and/or other specific functions after it is applied on substrate
[GB/T 5206-2015, definition 2.51]
3.3
water-borne coating material
a kind of coating material of which the main component of volatile matter is water
[GB/T 5206-2015, definition 2.274]
Note 1: For example water-borne coating material for architectures and water-borne coating material for industry uses, etc.
Note 2: Coating products which are used while adding water also belong to water-borne coating material, e.g. inorganic powder coating material for architectures.
3.4
water-borne coating material for architectures
wall coating material prepared by adding auxiliaries, water, cosolvents or the like in main film forming matters such as synthetic resin emulsion and natural resin emulsion and applied on the internal and external surfaces of architecture which uses cement-based and other nonmetallic material as the substrate
GB/T 35602-2017 The following standards are cited：
