This standard specifies the classification and naming, technical requirements, test method, quality assessment procedures and marking, packaging, transportation and storage for read-write equipment of the electronic identification of motor vehicles.
This standard is applicable to the design, production, test and use of read-write equipment of the electronic identification of motor vehicles.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB/T 2423.1 Environmental Testing - Part 2: Test Methods - Tests A: Cold
GB/T 2423.2 Environmental Testing - Part 2: Test Methods - Tests B: Dry Heat
GB/T 2423.3 Environmental Testing - Part 2: Testing Method - Test Cab: Damp Heat, Steady State
GB/T 2423.5 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Ea and Guidance: Shock
GB/T 2423.6 Environmental Testing for Electric and Electronic Products - Part 2: Test Methods - Test Eb and Guidance: Bump
GB/T 2423.8-1995 Environmental Testing for Electric and Electronic Products Part 2: Test Methods Test Ed: Free Fall
GB/T 2423.10 Environmental Testing for Electric and Electronic Products - Part 2: Tests Methods - Test Fc: Vibration (Sinusoidal)
GB/T 2423.17 Environmental Testing for Electric and Electronic Products - Part 2: Test Method - Test Ka: Salt Mist
GB/T 2423.24 Environmental Testing - Part 2: Test Methods - Test Sa: Simulated Solar Radiation at Ground Level and Guidance for Solar Radiation Testing
GB/T 4208-2008 Degrees of Protection Provided by Enclosure (IP Code)
GB/T 4857.5 Packaging - Transport Packages - Vertical Impact Test Method by Dropping
GB/T 4943.1 Information Technology Equipment - Safety - Part 1: General Requirements
GB/T 5080.7 Equipment Reliability Testing Compliance Test Plans for Failure Rate and Mean Time between Failures Assuming Constant Failure Rate
GB/T 5271.14 Information Technology - Vocabulary Part 14: Reliability, Maintainability and Availability
GB/T 9254-2008 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement
GB/T 11313.16 Radio-frequency Connectors - Part 16: Sectional Specification for RF Coaxial Connectors with Inner Diameter of Outer Conductor 7mm (0.276 in) with Screw Coupling - Characteristics Impedance 50Ω (75Ω) (Type N)
GB/T 15629.3 Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specification
GB/T 15934 Electrical Accessories - Cord Sets and Interconnection Cord Sets
GB/T 16796 Safety Requirements and Test Methods for Security
GB/T 17625.1 Electromagnetic Compatibility C Limits - Limits for Harmonic Current Emissions (Equipment Input Current ≤16A per Phase)
GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
GB/T 17626.3-2016 Electromagnetic Compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test
GB/T 17626.4-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Electrical Fast Transient/Burst Immunity Test
GB/T 17626.5-2008 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge Immunity Test
GB/T 26125 Electrical and Electronic Products - Determination of Six Regulated Substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers)
GB/T 26572 Requirements of Concentration Limits for Certain Restricted Substances in Electrical and Electronic Products
GB/T 35787 Security Technical Requirement for the Read-write Equipment of the Electronic Identification of Motor Vehicles
GB/T 35789.1-2017 General Specification for the Electronic Identification of Motor Vehicles - Part 1: Automobile
GB/T 35790.1 Specification for Installation of the Electronic Identification of Motor Vehicles - Part 1: Automobile
ANSI/TIA/EIA 485-A Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 35789.1-2017 and the following apply.
3.1
read-write equipment
electronic device for reading or writing data on electronic identification of motor vehicles based on ultrahigh-frequency radiofrequency identification technology, which is composed of read-write unit, antenna unit, feeder unit etc.
3.1.1
GB/T 35786-2017 The following standards are cited：
