This standard specifies the nominal cross-sectional areas, in the range 0.5mm2 to 2500mm2, for conductors in electric power cables and cords of a wide range of types. Requirements for numbers and sizes of wires and resistance values are also included. These conductors include solid and stranded copper, aluminium and aluminium alloy conductors in cables for fixed installations and flexible copper conductors.
This standard does not apply to conductors for telecommunication purposes.
The applicability of this standard to a particular type of cable is as specified in this standard for the type of cable.
Unless indicated to the contrary in a particular clause, this standard relates to the conductors in the finished cable and not to the conductor as made or supplied for inclusion into a cable.
Informative annexes are included giving supplementary information covering temperature correction factors for resistance measurement (Annex B) and dimensional limits of circular conductors (Annex C).
2 Terms and Definitions
For the purpose of this standard, the following terms and definitions apply.
2.1
Metal-coated
Coated with a thin layer of suitable metal, such as tin or tin alloy.
2.2
Nominal cross-sectional area
Value that identifies a particular size of conductor but is not subject to direct measurement.
Note: Each particular size of conductor in this standard is required to meet a maximum resistance value.