This part of GB/T 9160 specifies identification code, dimensions, technical requirements, test method, inspection rules, marking and rustproof packaging for adapter assemblies, adapter sleeves and withdrawal sleeves with tapers 1:12 or 1:30.
This part applies to the production, inspection and acceptance of the adapter sleeves assemblies and the withdrawal sleeves for rolling bearings of a number of dimension series as specified in GB/T 273.3.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 192 General purpose metric screw threads—Basic profile
GB/T 196 General purpose metric screw threads—Basic dimensions
GB/T 272 Rolling bearings—Identification code
GB/T 273.3 Rolling bearings—Boundary dimensions, general plan—Part 3: Radial bearings
GB/T 275 Rolling Bearings—Fits
GB/T 699 Quality carbon structure steel
GB/T 1800.1 Geometrical product specifications (GPS)—Limits and fits—Part 1: bases of tolerances, deviations and fits
GB/T 2516 General purpose metric screw threads—Limit deviations
GB/T 5796.1 Trapezoidal screw threads—Part 1:Profiles
GB/T 5796.3 Trapezoidal screw threads—Part 3:Basic dimensions
GB/T 5796.4 Trapezoidal screw threads—Part 4:Tolerances
GB/T 6930 Rolling bearings—Vocabulary
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9160.2 Rolling bearings—Accessories—Part 2: Locknuts and locking devices
GB/T 8597 Rolling bearings—Rust proof packaging
GB/T 24605 Rolling bearings—Marking for products
GB/T 24608 Inspection rules for rolling bearings and commercial parts
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 6930 and the following apply.
GB/T 9160.1-2017 The following standards are cited：
GB/T 9160.1-2017 Cited by the following standards：
