Standard No.:	GB/T 9160.1-2006
Chinese Name:	滚动轴承 附件 第1部分：锥形衬套
English Name:	Rolling bearings―Accessories―Part 1: Tapered sleeves
Professional Classification:	J11 Rolling bearing
Professional Classification:	GB National Standard
ICS Classification:	21.100.20 Rolling bearings
Issued by:
Issued on:	2006-07-05
Implemented on:	2006-12-01
Status:	ABOLISHED
Replace By:	GB/T9160.1-2017 Rolling bearings—Accessories—Part 1: Adapter sleeve assemblies and withdrawal sleeves
Replace By Date:	2017-12-01
Language:	English
File Format:	PDF
Word Count:
Price(USD):	please email coc@codeofchina.com for quotation
Delivery:	via email in 1-3 business day

1 Scope

This Part of GB/T 9160 specifies designation methods, structural diagrams, dimensions, tolerances, requirements, inspection rules and measuring methods of adapter sleeves with taper 1:12 and withdrawal sleeves with tapers 1:12 and 1:30.
This Part is applicable to adapter sleeves and withdrawal sleeves for rolling bearings of a number of dimension series as specified in GB/T 273.3-1999.

2 Normative References

The following normative documents contain provisions, which through reference in this text, constitute provisions of this Part of GB/T 9160. For dated references, subsequent amendments to,(not including the wrong contents) or revisions of, any of these publications do not apply. However, parties to agreements based on this part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 192-2003 General Purpose Metric Screw Threads — Basic Profile (ISO 68-1:1998, MOD)
GB/T 196-2003 General Purpose Metric Screw Threads — Basic Dimensions (ISO 724:1993, MOD)
GB/T 272-1993 Rolling Bearings — Designation
GB/T 273.3-1999 Rolling Bearings — Radial Bearings — Boundary Dimensions, General Plan (eqv ISO 15:1998)
GB/T 275-1993 Shaft and Housing Fits for Rolling Bearings
GB/T 307.2-2005 Rolling Bearings — Measuring and Inspection Principles and Methods (ISO 1132-2:2001, MOD)
GB/T 699-1999 High Quality Carbon Structural Steels
GB/T 1804-2000 General Tolerances — Tolerances for Linear and Angular Dimensions not Specific Shown (eqv ISO 2768-1:1989)
GB/T 2516-2003 General Purpose Metric Screw Threads — Limit Deviations (ISO 965-3:1998, MOD)
GB/T 5796.1-2005 Trapezoidal Screw Threads — Part 1: Profiles (ISO 2901:1993, MOD)
GB/T 5796.3-2005 Trapezoidal Screw Threads — Part 3: Basic Dimensions (ISO 2904:1977, MOD)
GB/T 5796.4-2005 Trapezoidal Screw Threads — Part 4: Tolerances (ISO 2903:1993, MOD)
GB/T 6930-2002 Rolling Bearings — Vocabulary (ISO 5593:1997, IDT)
GB/T 8597-2003 Rolling Bearings — Rust Proof Packaging
JB/T 3574-1997 Rolling Bearings — Marking for Products
JB/T 8921-1999 Rolling Bearings and Commercial Parts — Inspection Rules