This standard specifies galvanization classification, technical requirements, test methods and inspection rules for electroplated layer of leather hardware accessory.
This standard is applicable to hardware accessories of various leather products.
2 Normative References
GB/T 5933 Adhesion Testing Method of the Metal Deposits for the Light Industrial Products
GB/T 5938 Corrosion-resistant Testing Method of the Metal Deposits and Conversion Coatings for the Light Industrial Products - Neutral Salt Spraying Test (NSS)
GB/T 5944 Evaluation of the Corrosion Test Results of the Metal Deposits for the Light Industrial Products
GB/T 6739 Determination of Film Hardness by Pencil
3 Terms
3.1 Seediness: film is with rough surface, particles or impurities.
3.2 Color difference: for the same product, its parts are respectively different in color.
3.3 Uniform color and luster: surface of the same part is uniform in color.
3.4 Sagging: vertical to the surface of object, the paint flows down before drying, which makes the thickness of dried film uneven and leaves flow mark on it.
3.5 Favorable light: for natural light, its luminance is 400~700 lx; for approximate natural light, its luminance corresponds to that of 40W fluorescent lamp which is 500~700 mm away from the sample.
QB/T 2002.1-1994 The following standards are cited:
QB/T 2002.1-1994 Cited by the following standards: