This standard specifies terms and definitions, classification, requirements, test conditions, test methods, inspection rules, instructions, marking, packaging, transportation and storage of office furniture - the composition of screen and desk (table).
This standard is applicable to the composition of screen and desk (table).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1732 Determination of Impact Resistance of Film
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attributea C Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection
GB/T 3325 Metal Furniture - General Technical Requirements
GB/T 3922 Textiles - Tests for Colour Fastness - Colour Fastness to Perspiration
GB/T 4893.2 Furniture - Assessment of Surface Resistance to Wet Heat
GB/T 4893.3 Furniture-Assessment of Surface Resistance to Dry Heat
GB/T 4893.4 Test of Surface Coatings of Furniture - Part 4: Determination of adhesion - Cross Cut
GB/T 4893.7 Test of Surface Coatings of Furniture - Part 7: Determination of Surface Resistance to Alternation of Heat and Cold
GB/T 4893.8 Test of Surface Coatings of Furniture - Part 8: Determination of Wearability
GB/T 4893.9 Test of Surface Coatings of Furniture - Part 9: Determination of Resistance to Impact
GB 5296.6 Instructions for Use of Products of Consumer Interest - Part 6: Furniture
GB 6675.2-2014 Safety of Toys - Part 2: Mechanical and Physical Properties
GB/T 6739-2006 Paints and Varnishes - Determination of Film Hardness by Pencil Test
GB/T 9286 Paints and Varnishes - Cross Cut Test for Films
GB/T 10357.1-2013 Test of Mechanical Properties of Furniture - Part 1: Strength and Durability of Tables
GB/T 10357.5-2011 Test of Mechanical Properties of Furniture - Part 5: Strength and Durability of Storage Units
