This standard specifies the product classification, requirements, test methods, inspection rules, and product packaging, marking, transportation and storage of hot-application filling compounds for communication cables.
This standard is applicable to the manufacture and purchase of filling compounds for telecommunication cables.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, all editions cited were valid. All normative documents are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below.
GB/T 325-1991 Packing containers - Steel drum
GB/T 2828-1987 Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
GB/T 2829-1987 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of stability for productive process)
GB/T 6540-1991 Petroleum products - Determination of colour
YD/T 839.1-2000 Filling compounds and flooding compounds for telecommunication cable and optical fiber cable - Part 1: Test method
3 Terms
3.1 hot-application filling compounds
a kind of material that needs to be melted into a melt by heating during application, with its performance affected by its melting point, and used to fill the air gap of the multi-conductor wire and cable cores to prevent water or other fluids from flowing or migrating into the cable
3.2 unit product
1t hot-application filling compounds as specified in this standard
YD/T 839.2-2000 The following standards are cited：
