This part specifies the product classification, requirements, inspection rules and test methods, packaging, marking, transport and storage for filling compounds for telecommunication cable and optical fibre cable.
This part is applicable to filling compounds for longitudinal water resistance used in telecommunication cable and optical fibre cable that are not in contact with optical fibers, optical fiber bundles, and optical fiber ribbons.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 325.2-2010 Packaging container - Steel drums - Part 2: Removable head (open head) drums with a minimum total capacity of 208 L, 210 L and 216.5 L
GB/T 2828.1-2012 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 6540-1986 Petroleum products - Determination of colour
GB/T 13508-2011 Polyethylene blown containers
YD/T 839.1-2014 Filling compounds and flooding compounds for telecommunication cable and optical fibre cable - Part 1: Test methods
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
filling compounds
YD/T 839.3-2014 The following standards are cited：
