This part of GB 15208 specifies the classification, general technical requirements, test method, inspection rules, packaging, marking, storage, transportation and accompanied technical documents of micro-dose X-ray security inspection system.
This part is applicable to the design, manufacturing, acceptance and service of various micro-dose X-ray security inspection systems.
This part is not applicable to X-ray security inspection system like computed tomography (CT), electron accelerator or X-ray generating device with energy greater than 500keV.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 191-2008 Packaging - Pictorial marking for handling of goods
GB/T 2423.1-2008 Environmental testing - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 Environmental testing - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.3-2016 Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2: Tests methods - Test Fc: Vibration (sinusoidal)
GB/T 4208-2017 Degrees of protection provided by enclosure (IP code)
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements
GB/T 9254-2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
GB/T 17626.2-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test
GB/T 17626.3-2016 Electromagnetic compatibility - Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test
GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test
GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields
GB/T 17626.11-2008 Electromagnetic compatibility - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17799.1-2017 Electromagnetic compatibility - Generic standards - Immunity for residential, commercial and light-industrial environments
GB/T 17799.2-2003 Electromagnetic compatibility - Generic standards - Immunity for industrial environments
GB/T 17799.3-2012 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for industrial environments
GB/T 17799.4-2012 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for industrial environments
3 Terms and definitions
GB 15208.1-2018 The following standards are cited：
