This standard specifies the conditions, items, requirements and rules of installation acceptance of electric lift.
This code is applicable to the electric drive traction type passenger lift and freight lift with rated speed not greater than 6.0m/s and electrical driven positive drive passenger lift and freight lift with rated speed not greater than 0.63m/s. For the electric drive traction type passenger lift and freight lift with rated speed greater than 6.0m/s, this code may be referenced and the not applicable part may be determined through negotiation between the manufacturer and the client. As for the special purpose electric lift, such as fire lift and electric lift used for disabled personnel, the acceptance contents shall be adjusted according to the corresponding product standards.
This standard is not applicable to hydraulic lift, dumbwaiter lift, freight-only lift and home lift.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigendum), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB 4208 Degrees of Protection Provided by Enclosure (IP Code) (GB 4208-200, ICE 60529: 2001, IDT)
GB/T 5974.1 General Purpose Thimbles for Use with Steel Wire Ropes
GB/T 5974.2 Heavy Thimbles for Use with Steel Wire Ropes
GB/T 5976 Wire Rope Grips
GB/T 7024-2008 Terminology of Lifts, Escalators, Passenger Conveyors
GB 7588-2003 Safety Rules for the Construction and Installation of Electric Lifts (EN 81-1: 1998, MOD)
GB/T 10058-2009 Specification for Electric Lifts
GB/T 10059-2009 Electric lifts - Testing Methods
GB 14048.4 Low-voltage Switchgear and Controlgear--Low-voltage Electromechanical Contactors and Motor Starters (GB 14048.4-2003, IEC 60947-4-1: 2000, IDT)
GB 16895.3 Electrical Installations of Buildings - Part 5-54: Selection and Erection of Electrical Equipment - Earthing Arrangements, Protective Conductors and Protective Bonding Conductors (GB 16895.3-2004, IEC 60364-5-54: 2002, IDT)
GB/T 22562 Guide Rails for Lifts - T-type (GB/T 22562-2008, ISO 7465: 2007, IDT)
GB 23821-2009 Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by Upper and Lower Limbs (ISO 13857: 2008, IDT)
JG/T 5072.3-1996 Hollow Guide Rails for Elevators Counterweight
3 Terms and Definitions
For the purpose of this code, the following terms and definitions and those established in GB/T 7024-2008 and GB 7588-2003 apply.
3.1 Machinery
The traditional equipment placed in the machine room e.g. control cabinet, drive system, lift machine, main switch and emergency operating device.
3.2 Machinery space
The space used to place whole or partial machinery in or out of the hoistway.
