This code specifies the quality standards, contents, procedures of the acceptance of the inspection lot and sub-item projects as well as the requirements of the quality management and quality control on the construction site of the station procedure pipeline project.
This code is applicable to the acceptance of construction quality of procedure pipeline projects in the construction or renovation (extension) and renovation of the station yard and valve chest related to oil and gas long-distance pipelines and gathering and transportation pipelines.
This code is not applicable to the internal dehydration plant of oil and gas field, the construction quality acceptance of the pipelines that belong to in-station pumps, heating furnaces and other similar equipment bodies as well as instation high-temperature heat-transfer oil pipelines.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this code. For dated references, subsequent amendments to (excluding amending error in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this code are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document referred to applies.
GB 150 "Steel Pressure Vessels"
GB/T 9445 "Non-destructive Testing- Qualification and Certification of Personnel"
GB 50235 "Code for Construction and Acceptance of Industrial Metallic Piping"
SY/T 0063 "Standard Test Methods for Holiday Detection in Pipeline Coatings"
SY/T 4103 "Welding and Acceptance for Steel Pipings and Pipelines"
SY/T 4109 "Nondestructive Testing of Oil and Gas Steel Pipeline"
SY 4200 "Code for Quality Acceptance of Oil and Gas Construction Engineering-General rule"
JB/T 450 "Technical conditions of PN 16.0~32.0MPa Forged Angle High Pressure Valves, Pipe Fittings and Fastening Pieces"
3 Terms and Definitions
For the purpose of this code, the following terms and definitions apply.
3.1
Piping
The fabrication assembly composed of piping components and used for transporting, distributing, mixing, separating, discharging, metering, controlling or preventing the fluid flow.
3.2
Piping components
The elements used for connecting or assembling pipelines, including the pipes, pipe fittings, pipe-supporting elements, fixtures, flanges, gaskets, fastening pieces, valves as well as expansion joints, flexible joints, pressure hoses and separators.
3.3
Piping components
Tit is the generic term of the elbow, bent pipe, compensator, reducing pipe, tee joint, boss, insulating joint, pipe manifold and end socket.
3.4
Pipe-supporting elements
It is the generic term of the pipe pier, support and its relevant connecting piece use for supporting and fixing pipelines.
3.5
Fixtures
The elements transmitting the load from the pipe or structural attachments of the pipeline to the supporting structure or equipment, including the hanger rod, spring supports and hangers, diagonal draw bar, balance weight, turnbuckles, support bar, chain, guide rail, anchoring element and saddle.
3.6
Structural attachments
The parts attached on the pipe by adopting welding, bolted connection or clamping methods, including the piping lug, lifting (support) lug, circular ring, clamp, suspension clamp, anchorage splint and apron type pipe saddle.
3.7
100% radiographic test
The radiographic test on the full circumference of all circumferential butt welds and the radiographic test on the overall length of the longitudinal weld for a batch of designated pipelines.
3.8
Random radiographic test
The radiographic test on the full circumference of the circumferential butt weld of the pipeline according to a certain random inspection proportion in a batch of designated pipelines.
4 General Rules
4.1 This code is formulated according to the requirements of relevant current laws and regulations as well as management standards of the project quality and relevant technical standards of the Nation and petroleum natural gas profession.
4.2 The requirements of the construction quality acceptance of the station procedure pipeline stated in the contract agreement document, design documents, and other engineering technology documents adopted under construction shall not be less than the requirements of this code.
4.3 This code shall be applied with SY 4200.
4.4 The specification for the construction quality acceptance of the station procedure pipeline project shall not only implement this code, but also shall meet the requirements of the current relevant mandatory standards of the Nation.
SY 4203-2007 — Standards cited
SY 4203-2007 — Cited by
Use of cookies on this website:
We use strictly necessary cookies to make our site work. We would also like to set optional analytics cookies
to help us improve it, and targeting cookies. We won't set optional cookies unless you enable them.
For more detailed information about the cookies we use, see our
Cookies Notice.
By clicking "Accept all cookies", you agree to the storing of cookies on your device for the purposes set out
in our Cookies Notice. Click "Reject non-essential" to refuse optional cookies.
Strictly necessary cookies are always active and cannot be disabled.
Cookie Consent Manager
Your Privacy
Websites may store or retrieve information on your browser, mostly in the form of cookies.
This information might be about you, your preferences, or your device and is mostly used to make
the site work as you expect it to. The information does not usually directly identify you, but it
can give you a more personalized web experience. Because we respect your right to privacy, you can
choose not to allow some types of cookies. Click on the different category headings to find out more
and change our default settings. However, blocking some types of cookies may impact your experience
of the site and the services we are able to offer.
These cookies are required for the operation of our website and use of its features, and therefore
cannot be switched off in our systems. They are usually only set in response to actions made by you
which amount to a request for services, such as setting your privacy preferences, logging in, or
filling in forms.
Functional Cookies
These cookies are optional and are used to remember the choices you have made.
These cookies are optional and are used to collect information on how visitors use our website.
Targeting Cookies
These cookies may be set to deliver advertising that is more relevant to you and your interests,
or to measure advertising effectiveness. California residents may opt out of the sale or sharing
of personal information via Do Not Sell/Share.
If this site does not currently run advertising pixels, enabling this category has no effect until such tools are added.