This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and contract (or order form) contents of lithium nickel cobalt manganese oxide.
This standard is applicable to lithium nickel cobalt manganese oxide, a positive active material for lithium ion batteries.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1717 Determination of pH value of an aqueous suspension of pigments
GB/T 5162 Metallic powders—Determination of tap density
GB/T 5314 Powders for powder metallurgical purposes—Sampling
GB/T 6283 Chemical products—Determination of water Karl·Fischer method (general method)
GB/T 19077.1 Particle size analysis—Laser diffraction method—Part 1: General principles
GB/T 19587 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 20252-2006 Lithium cobalt oxide
GB/T 23365 Electrochemical performance test of lithium cobalt oxide—Test method for specific capacity and charge-discharge efficiency of the first cycle
GB/T 23366 Electrochemical performance test of lithium cobalt oxide—Test method for discharge plateau capacity ratio and cycle life
JCPDS(09-0063) Standard pattern of lithium nickel oxide X-ray powder diffraction
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 20252-2006 apply.
4 Requirements
4.1 Chemical composition
4.1.1 The chemical composition of the product shall meet the requirements of Table 1.
